5 Best Table Saws for Beginners (Start Smaller Than You Think)
The best table saws for beginners, from a compact DeWalt that still rips a 4x8 sheet in half to 10-inch saws with rolling stands. Our five picks from DeWalt, Bosch and SKIL, and the two safety habits to learn on day one.

Our top picks at a glance
- Check Amazon Price
A compact saw with a rack-and-pinion fence and 24-1/2 inches of rip capacity, enough to cut a 4x8 sheet of plywood in half. Read more
Pros
- Rips a 4x8 sheet down the middle
- Rack-and-pinion fence
- Tool-free guard adjustments
- 4.8 stars on more than 5,000 ratings
Cons
- 2-9/16-inch depth of cut
- No stand included
- Check Amazon Price
The full-size version, with a 10-inch blade, 32-1/2 inches of rip capacity and a rolling stand. Read more
Pros
- 32-1/2-inch rip capacity
- Rolling stand included
- Onboard storage for the push stick and riving knife
- 3-year warranty
Cons
- About twice the price of the compact DeWalt
- Heavy to lift into a truck
- Check Amazon Price
Soft start, a brake that stops the blade in about 3 seconds, and the deepest cut of the 10-inch picks. Read more
Pros
- Blade brake and soft start
- 3-9/16-inch depth of cut
- 32-1/8-inch rip capacity
- Gravity-Rise wheeled stand
Cons
- Fewer owner ratings so far
- 1-year warranty on the listing
- Check Amazon Price
The cheapest pick, with a stand built in, a rack-and-pinion fence and a 3-year warranty. Read more
Pros
- Lowest price here
- Folding stand built in
- Cuts a 4x4 at 90 degrees
- 3-year warranty
Cons
- Stand has no wheels
- 25-1/2-inch rip capacity
- Check Amazon Price
Worm drive gearing, a 3-5/8-inch depth of cut and a rolling stand with 16-inch wheels. Read more
Pros
- Worm drive gearing
- Deepest cut here at 3-5/8 inches
- 30-1/2-inch rip capacity
- 16-inch wheels
Cons
- About 94 pounds
- Pricey for a first saw
Prefer to watch?
5 Best Table Saws for Beginners. Does Sizing Matter!? Watch on YouTube
Most beginners assume they need a big 10-inch table saw. You might not. The smallest saw on this list, DeWalt’s 8-1/4-inch compact, rips 24-1/2 inches to the right of the blade. A 4x8 sheet of plywood is 48 inches wide, so that’s enough to cut it straight down the middle.
I haven’t run these five myself. Everything below comes from the makers’ spec sheets and the Amazon listings, and every pick was in stock on Amazon when I checked.
Compare at a glance
| Table saw | Blade | Rip capacity (right) | Depth at 90° | Stand | Warranty |
|---|---|---|---|---|---|
| DeWalt DWE7485 | 8-1/4” | 24-1/2” | 2-9/16” | Not included | 3 years |
| DeWalt DWE7491RS | 10” | 32-1/2” | 3-1/8” | Rolling | 3 years |
| Bosch GTS15-10 | 10” | 32-1/8” | 3-9/16” | Wheeled, Gravity-Rise | 1 year (listing) |
| SKIL TS6307-00 | 10” | 25-1/2” | 3-1/2” | Folding, built in | 3 years |
| SKIL SPT99-11 | 10” | 30-1/2” | 3-5/8” | Rolling, 16” wheels | 1 year (listing) |
Specs come from DeWalt, Bosch and SKIL and the Amazon listings.
1. DeWalt DWE7485

Who it’s for: Most beginners building shelves, furniture and small projects in a garage.
The DWE7485 is the one I’d start with. It’s compact, so it stores on a shelf, but its rack-and-pinion fence still rips 24-1/2 inches, enough to cut a sheet of plywood down the middle. The guard adjusts without tools, everything stores on the saw, and a power-loss reset keeps it from restarting by itself if the power blinks while the switch is on. It has a 4.8-star average on more than 5,000 Amazon ratings.
The smaller blade cuts 2-9/16 inches deep at 90 degrees, so it won’t get through a 4x4 in one pass. There’s no stand in the box either; you’ll need a bench or DeWalt’s stand.
Check Amazon Price: DeWalt DWE7485
2. DeWalt DWE7491RS
Who it’s for: Anyone who knows they’ll cut a lot of plywood, or wants the saw to roll.
This is the full-size version of the top pick. You get a 10-inch blade, 3-1/8 inches of depth at 90 degrees and 32-1/2 inches of rip capacity on the same rack-and-pinion fence. The rolling stand folds up, and onboard storage holds the guard, fence, riving knife, miter gauge, wrenches and push stick. DeWalt covers it for 3 years.
It costs about twice as much as the compact DeWalt, and it’s a lot heavier to lift.
Check Amazon Price: DeWalt DWE7491RS
3. Bosch GTS15-10
Who it’s for: Beginners who want a few extra safety and convenience features.
Bosch’s newer jobsite saw adds two conveniences. Soft-start circuitry eases the motor up so it’s less likely to trip a breaker, and a brake stops the blade in about 3 seconds after you switch off. It also has a riving knife with anti-kickback pawls, the deepest cut of the 10-inch picks at 3-9/16 inches, 32-1/8 inches of rip capacity and a Gravity-Rise wheeled stand.
It has fewer owner ratings than the DeWalts, and the Amazon listing shows a 1-year warranty. Note the brake is a convenience brake that stops a spinning blade faster. It is not a flesh-sensing safety system.
Check Amazon Price: Bosch GTS15-10
4. SKIL TS6307-00
Who it’s for: Tight budgets.
The SKIL is the cheapest saw here, and it includes a folding stand, so there’s nothing else to buy. You get a 10-inch blade, a rack-and-pinion fence, a micro-adjustment for lining the blade up with the fence and miter slot, and enough depth to cut a 4x4 at 90 degrees. SKIL covers it for 3 years, and it has a 4.5-star average on more than 3,000 ratings.
The stand folds but doesn’t have wheels, and the 25-1/2-inch rip capacity is closer to the compact DeWalt than to the big 10-inch saws.
Check Amazon Price: SKIL TS6307-00
5. SKIL SPT99-11
Who it’s for: Someone who’ll cut thick hardwood and wants the most cutting power.
This is a worm drive table saw, built around the same kind of gearing as SKIL’s worm drive circular saws. It has the deepest cut on this list at 3-5/8 inches, 30-1/2 inches of rip capacity, and a rolling stand with 16-inch wheels plus outfeed and left-side supports.
At about 94 pounds it’s the heaviest saw here, and it costs more than most beginners need to spend on a first saw.
Check Amazon Price: SKIL SPT99-11
Two habits to learn on day one
- Leave the riving knife on. It sits right behind the blade and keeps the cut from closing and pinching the blade, which is what causes most kickback. Every saw here comes with one.
- Use a push stick, and stand to the side. Keep your hands well clear of the blade on narrow rips, and don’t stand directly behind the board, where kickback goes.
Not sure you need a table saw first? Our miter saw vs table saw guide walks through it, and for cutting plywood without a table saw, see our track saw picks.
We may earn a commission if you buy through links on this page. It never changes what we recommend. As an Amazon Associate we earn from qualifying purchases. Learn more.




