I Turned a $1,299 Bluetti Into a Home Solar Backup System
How to build a BLUETTI Elite 300 out into a real home solar backup setup: two 350W panels wired side by side, the connectors and 30-foot cable that keep the station indoors, and a rolling cart to move all 58 pounds of it.

Our top picks at a glance
- Check Amazon Price
3,014 Wh and 2,400 W in what BLUETTI calls the smallest 3 kWh power station, with a 10 ms switchover and a TT-30 RV outlet. Read more
Pros
- 3,014 Wh LFP battery
- 2,400 W output
- 10 ms UPS switchover
- About 1.6 hours to 80% from the wall (BLUETTI)
Cons
- About 58 pounds
- Solar cable not listed in the box
- Check Amazon Price
A 350 W folding panel with an ETFE coating and an IP67 rating. BLUETTI lists the Elite 300 as compatible. Read more
Pros
- 350 W each
- ETFE coating
- IP67
- MC4 plugs
Cons
- About 30.6 pounds each
- You need two
- Check Amazon Price
A pair of Y connectors that wire the two panels side by side (in parallel) into one MC4 lead. Read more
Pros
- Under $10
- 4.7 stars on 10,000+ ratings
Cons
- Get the polarity right
- Check Amazon Price
Runs from the panels' MC4 plugs to the Elite 300's XT60 solar input, with enough length to keep the station indoors. Read more
Pros
- 30 feet
- 10 AWG
Cons
- Third-party cable
- Check Amazon Price
A folding three-shelf cart rated for 210 pounds, so you can roll the station from the closet to the fridge. Read more
Pros
- 210 lb capacity
- Folds flat
- 4.8 stars on 700+ ratings
Cons
- Not a sealed cabinet
Prefer to watch?
I Turned a $1,299 Bluetti Into a Home Solar Backup System Watch on YouTube
A 3 kWh power station used to mean a box you couldn’t lift. This build starts with a $1,299 BLUETTI Elite 300, which BLUETTI calls the smallest 3 kWh power station, and adds the pieces that turn it into a real home solar backup setup.
I haven’t had this exact setup on my own bench. Everything below comes from BLUETTI’s spec pages and the Amazon listings, and I checked that every piece works with the others. Prices change often, so check each link.
The build at a glance
| Piece | What it does | Key spec |
|---|---|---|
| BLUETTI Elite 300 | Battery and outlets | 3,014 Wh, 2,400 W, 10 ms switchover |
| 2 BLUETTI PV350 panels | Refill it from the sun | 350 W each |
| BougeRV Y connectors | Wire the two panels side by side | MC4 |
| Vansdon 30 ft solar to XT60 cable | Connects the panels to the station | 10 AWG |
| WORKPRO utility cart | Moves the station | 210 lb capacity |
1. BLUETTI Elite 300
The brain of the build. It’s a 3,014 watt-hour lithium iron phosphate battery with 2,400 watts of output, in a box BLUETTI says is 59% smaller than traditional large power stations. BLUETTI says it charges to 80% from the wall in about 1.6 hours, and it switches over in 10 milliseconds when the power drops, so your router, computer and CPAP stay on. BLUETTI also says it can run a fridge for up to two days.
It also has a TT-30 RV outlet and a 12V/30A DC port, so it does double duty in an RV. At about 58 pounds, it’s not light, which is why the cart is on this list.
Check Amazon Price: BLUETTI Elite 300
2. BLUETTI PV350 Portable Solar Panel (buy two)
BLUETTI lists the Elite 300 as compatible with its PV350 panel. Each one is rated at 350 watts, with an ETFE coating and an IP67 rating. Two of them, wired side by side, give you 700 watts of panel, which leaves headroom for the clouds, heat and sun angle that cut real output.
Wire them side by side (in parallel), not end to end. In parallel, the voltage stays the same as one panel, which keeps it inside the Elite 300’s solar input range.
Check Amazon Price: BLUETTI PV350
3. BougeRV MC4 Y Branch Parallel Connectors
These join the two panels into one pair of MC4 leads. Plug the two positive leads into one Y and the two negatives into the other.
Check Amazon Price: BougeRV MC4 Y Branch Connectors
4. Vansdon 30 ft Solar to XT60 Cable
The Elite 300’s solar input is an XT60 port, and BLUETTI’s box list doesn’t include a solar cable, so you need one. A 30-foot, 10-gauge run lets you put the panels in the sun and keep the station inside. Run it through a cracked window or door.
Check Amazon Price: Vansdon 30 ft Solar to XT60 Cable
5. WORKPRO 3-Tier Collapsible Utility Cart
At about 58 pounds, the Elite 300 is easier to roll than to carry. This folding cart is rated for 210 pounds, so the station fits on the bottom shelf with room for cables and a lamp on top, and it folds flat when the outage is over.
Check Amazon Price: WORKPRO 3-Tier Utility Cart
The fridge math
A typical modern fridge uses roughly 1 to 2 kWh a day, so measure yours with a plug-in meter. The Elite 300’s 3,014 watt-hours carries an efficient fridge for about a day and a half to two days on its own. On a sunny day, the two panels put a big share of that back in.
One safety rule
Never plug a power station into a wall outlet to feed the house. If you want it connected to your panel, that’s a transfer switch installed by an electrician.
Want something different?
If you’d rather start smaller, see how we turned a $579 EcoFlow DELTA 3 into a home solar backup. For one big box, see our best power stations for whole-home backup, and for more panel options, our portable solar panels for power stations.
We may earn a commission if you buy through links on this page. It never changes what we recommend. As an Amazon Associate we earn from qualifying purchases. Learn more.




